Send us your instruments, or we will come to you. One laboratory looks after your whole list, and every result is traceable to national and international standards.
Type what you need calibrated. You will see the accredited range, our CMC and where to read more.
Hello from the lab.
Our team has spent over twenty years looking after the instruments other people's results depend on. Micropipettes of any brand, weights, balances, glassware, thermometers, controllers. We service them, check them, calibrate them, and send each one back with a certificate that is traceable to NABL.
The team at PipettemannCoimbatore · calibrating since 2002
This is exactly what we are accredited to calibrate, with the ranges and CMC (±) taken from our NABL scope. If your instrument is not listed, ask us.
0.2 µl → 2000 ml
| Instrument | Range | CMC (±) |
|---|---|---|
| Micropipettes | 0.2 µl – 10000 µl | 0.03 µl – 6 µl |
| Piston burettes | 1 ml – 50 ml | 29 µl |
| Pipette controllers | 1 ml – 50 ml | 29 µl |
| Bottle-top dispensers | 0.25 ml – 100 ml | 119 µl |
| Glassware: burettes, pipettes, flasks, cylinders, beakers | 0.5 ml – 2000 ml | 0.09 – 0.45 ml |
1 mg → 6.2 kg
| E2 class weights & coarser | 1 mg – 200 g |
| F2 class weights & coarser | 1 mg – 5 kg |
| Electronic weighing balances | up to 6.2 kg |
100 → 14000 rpm
| CMC (±) | 2.20 – 12.40 rpm |
−200 → 1800 °C
| Temperature indicators / controllers | ± 0.51 – 2.40 °C |
| Timers, 1 s – 24 h | ± 0.18 – 14.70 s |
−25 → 1500 °C · 30 → 90 % RH
| Instrument | Range | CMC (±) |
|---|---|---|
| Glass thermometers | 30 – 250 °C | 0.71 – 1.65 °C |
| RTD sensors & thermocouples | −25 – 1500 °C | 0.40 – 3 °C |
| IR thermometers | 0 – 500 °C | 1.90 – 5 °C |
| Thermo-hygrometers | 15 – 50 °C · 30 – 90 % RH | 0.70 °C · 1.25 % RH |
Calibration with servicing facility
The year we began servicing and calibrating micropipettes.
First NABL accreditation, for micropipette calibration to ISO 8655-6.
Our best calibration and measurement capability on micropipettes.
Upper limit of our accredited temperature controller range.
Started in April 2002 by Mr. M. Palani Selvan, servicing and calibrating micropipettes.
Mechanical calibration of micropipettes in volume, according to ISO 8655 part 6.
Scope extended to pipette controllers, piston-operated dispensers and piston burettes.
Accredited to calibrate each as per its respective international standard.
Thermal calibration of thermometers, temperature controllers with sensor and thermocouples.
RPM indicators, IR thermometers, thermo-hygrometers, temperature controllers and timers join the scope.
One ISO/IEC 17025:2017 accredited laboratory for your whole instrument list.
Send your instrument list. We confirm what falls within our accredited scope and whether it is done at our lab or at your site.
Micropipettes and thermal equipment of all brands are serviced first, so the instrument being calibrated is one that is fit to be used.
Methods follow the relevant international standards. Our master equipment is traceable to national and international standards.
You receive a calibration certificate traceable to NABL, ready for your audit file.
A reminder reaches you before the next calibration falls due.
True excellence is measured not just in numbers, but in the trust and impact we create.
Calibration certificate